6.7.3 Restoring factory settings
The factory setting can be restored using SIRIUS Safety ES software or automation software such
as STEP 7 (TIA Portal). During this, the communication parameters, such as IP addresses or device
name, station change authorizations, diagnostics deselection and, if applicable, the I&M data
are deleted. The safety application is not deleted.
Operation
6.7 Operating the 3SK25 PROFINET interface
SIRIUS 3RK3 Modular Safety System
244 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006
To Next Page
Loading...
