WARNING
System Restart After Fault Acknowledgment/Restart
Can Cause Death, Serious Injury, or Damage to Property.
After fault acknowledgment/restart, the system immediately resumes operation with the
values specied by the control, and outputs are activated if the power-on condition is fullled.
Take appropriate measures (e.g. start button with monitored starting) to prevent unintentional
restarting and to ensure a dened start of the system.
Reference
You will nd further information on the LED display during startup in Chapter "Startup / self-test
of the MSS 3RK3 Basic (Page 80)"
Diagnostics / service
7.3 Diagnostics with LEDs
SIRIUS 3RK3 Modular Safety System
258 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006
To Next Page
Loading...
