Siemens SIRIUS 3RK3 - Page 286

Error numbers
Error
no.
Description Explanation Remedy
24 Actuator disconnection Group error:
• Error in con󹪝guration
• Con󹪝guring error
• Protocol error on a bus
• Handshake error
• Group error from user program
• Wiring error
• Logic error
• Release denied due to incorrect con󹪝gura‐
tion CRC
• Release canceled due to incorrect con󹪝gura‐
tion release CRC
• Max. number of elements exceeded
• Max. size of memory exceeded
• Program cycle time exceeded
• TARGET≠ACTUAL con󹪝guration
• TARGET≠ACTUAL slot expanded con󹪝gura‐
tion
• Invalid parameter value
• Interconnection rule violated
• Data structure incorrect
• Memory module not plugged in
• Memory module defective
• Programming error
• Memory module too small
• Self-test error (device error)
• System interface con󹪝guration error
Eliminate cause of error and ac‐
knowledge
25 Safety-related tripping Logic error (user program) Eliminate cause of message
Diagnostics / service
7.4 Diagnostics via PROFINET
SIRIUS 3RK3 Modular Safety System
286 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006