Siemens SIRIUS 3RK3 - Page 346

• 5 min
• On
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting.
Return to the status display ⑥
This menu option speci󹪝es whether and at what time to switch back to the status display from
the current menu.
The following settings are possible:
• Manual
• 3 s
• 10 s (default setting)
• 1 min
• 5 min
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting.
Invert display ⑦
This setting makes it possible to specify whether the display should be displayed normally or
inverted. The readability of the display can be improved in the event of di󹪟cult lighting
conditions.
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting.
Messages ⑧
This setting makes it possible to specify whether to automatically switch to the "Messages" menu
if messages are pending and to display the messages (default setting) or whether the status
display should remain.
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting.
Factory settings ⑨
The factory setting makes it possible to reset the display settings to the default settings.
The desired setting can be marked with the arrow keys. The right key (OK) selects the marked
setting. A prompt for con󹪝rmation then follows that also has to be con󹪝rmed with the right key
(OK).
Diagnostics / service
7.7 Diagnostics with diagnostics display
SIRIUS 3RK3 Modular Safety System
346 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006