Note
Factory settings with connected DP interface
As communication with the DP interface is interrupted when the factory settings are being
restored, you must switch the entire system o and then on again once the they have been
restored.
Note
Factory settings of the diagnostics display
The factory settings for the diagnostics display can also be restored; see Chapter "Display settings
(Page 344)."
Note
Factory settings for DP interface
The factory settings for the DP interface can also be restored; see Chapter "Restoring factory
settings (Page 201)."
Diagnostics / service
7.8 Restoring factory settings
SIRIUS 3RK3 Modular Safety System
348 Equipment Manual, 07/2020, NEB926253002000/RS-AC/006
To Next Page
Loading...
