Siemens SITRANS FUE1010 IP65 NEMA 4X User Manual

FUE1010 IP65 NEMA 4X
Operating Instructions, 12/2014, A5E03086491-AC
141
Alarm, error, and system messages
8
Alarm Codes
The following alarm codes appear on the main display of the flow meter.
Table 8- 1 Alarm Codes
Letter Codes
Alarm Code
Description
SPACE
Spacing
Transducer spacing may need adjustment
EMPTY
Empty
Pipe is empty
HI/LO
Rate
Flow above High setting or below Low setting
FAULT
Fault
Three continuous seconds without new data update
AER
Aeration
Current aeration percentage exceeds the alarm set point
MEMRY
Memory
Last valid reading for a selected interval during Fault condition
MAKUP
Makeup
In-Process Makeup occurred
The following alarm codes appear in the Datalogger status messages:
I
Interface
Liquid Vs exceeds interface alarm set point
P Pig Pig passage detected (optional)
Z
Zeromatic
ZeroMatic signal fault
The displays shown below indicate where the Alarm Codes appear on the screen. Press
<UP> or <DOWN> arrows to change screen views.
①
Alarm Codes

Siemens SITRANS FUE1010 IP65 NEMA 4X Specifications

General

Brand	Siemens
Model	SITRANS FUE1010 IP65 NEMA 4X
Category	Measuring Instruments
Language	English