FUE1010 IP65 NEMA 4X
Operating Instructions, 12/2014, A5E03086491-AC
87
Before commissioning it must be checked that:
● The device has been installed and connected in accordance with the guidelines provided
in chapter 4 "Installing/mounting (Page 31)" and chapter 5 "Connecting (Page 35)"
● Device installed in hazardous location meets the requirements described in "Installation in
hazardous location (Page 14)"
Programming the Transmitter (Page 49) if needed.
1. Scroll down to [Install Sensor] and press <Right Arrow>.
2. Scroll down to [Install Complete]. Press the <Right Arrow> and select [Install]. Press
<ENTER>. The flow meter will go through its drives.
To Next Page
Loading...
Need help?
General
