Connecting
5.2 Transmitter Wiring
FUE1010 IP65 NEMA 4X
38 Operating Instructions, 12/2014, A5E03086491-AC
Note
If the transmitter is not already mounted and cabling has not been run, proceed to
Mounting
(Page 33) before connecting power.
Contact with exposed wiring will lead to fire, electric shock, or serious personal injury.
Turn off main power before installing AC connections to the transmitter.
1. Open the transmitter top cover by releasing the cover latch (for IP66 NEMA 7, remove
bolts).
2. Unscrew the two power supply access cover fasteners and remove access cover.
3. Locate power supply connector J10. Using a flat blade screwdriver, remove plug from
connector J10. Set aside.
To Next Page
Loading...
