Siemens SITRANS FUE1010 IP65 NEMA 4X - Return procedures; Battery disposal

FUE1010 IP65 NEMA 4X
Operating Instructions, 12/2014, A5E03086491-AC
143
Service and maintenance
9
9.1
Maintenance
The device is maintenance-free, however, a periodic inspection according pertinent
directives and regulations must be carried out.
An inspection can include check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover screws
● Reliability of power supply, lightning protection, and grounds
9.2
Technical support
NOTICE
Repair and Service
Repair and service must be carried out by approved Siemens personnel only.
Note
Siemens d
efines sensors as non-repairable products.
Technical Support
If you have any technical questions about the device described in these Operating
Instructions and do not find the right answers, you can contact Technical Support:
● Via the Internet using the
Support Request:
Service and support (http://www.siemens.com/automation/service&support)
● Phone: +49 (0) 911 895 7222 / 1 800 333-7421
Further information (Page 10) about our technical support is available in the Internet at
Technical support (http://support.automation.siemens.com/WW/view/en/16604318
)
Service & Support on the Internet
In addition to our documentation, we offer a comprehensive knowledge base online on the
Internet at:
Support request (http://www.siemens.com/automation/support-request
)