Troubleshooting
10.4 Site Setup Data
FUE1010 IP65 NEMA 4X
Operating Instructions, 12/2014, A5E03086491-AC
165
Automatic Adjustment Procedure
1. In the [Site Setup Data] Menu, press the <Down Arrow> and scroll to the [HF] menu cell.
Press the <Right Arrow> and a pop-up [Manual] prompt will appear.
2. Press the <Up or Down Arrow> to select [Automatic] then press <ENTER>.
3. The current measured correction value is displayed (see below).
To Next Page
Loading...
