Simplex 4100 - Entering and Exiting Walk Test Mode

Page 62 SIMPLEX 4100 EWIS
INSTALLATION MANUAL
Document No.: 4100-M011 March 1998 Issue 1.0
4.11 OPTIONS DETAIL REPORT
The Options Detail Report specifies the options selected for the system. Also
included in this report is a list of the passcode assignment levels for the various
system functions.
--------------------------------------------------------------------------------
XYZ BUILDING OPTIONS DETAIL REPORT Page 99
2796 node:1 rev:6 14:41:55, WED, 25-MAR-98
--------------------------------------------------------------------------------
OPTIONS
PASSCODES
Protection
Display Function Level
---------------------------------------- ----------
Alarm Silence 1
System Reset 1
Change Time and Date 1
Panel Control Key 1 1
Panel Control Key 2 1
Panel Control Key 3 1
Panel Control Key 4 1
Panel Control Key 5 1
ON/OFF/AUTO Keys 1
ARM/DISARM Keys 1
Change TrueAlarm Sensitivities 3
DISABLE/ENABLE Keys 3
Clear Trouble Log 3
Clear Alarm Log 3
Enter/exit Walk Test mode 3
Clear Alarm Verification tallies 3
* Fire Alarm Acknowledge 1
* Priority 2 Acknowledge 1
* Supervisory Acknowledge 1
* Trouble Acknowledge 1
* Alarm List/Display Time 1
* Change Point Status 4
* Run Diagnostics 4
* Display Diagnostics 3
* Remote Download 4
* Display Idle Time 4
* Memory Access 4
NOTE: * Indicates protected functions not on order sheet.
PROTECTION SCALE
Level 1 - Lo
Level 4 - Hi
Table 15 OPTIONS DETAIL REPORT