SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014 79
Field Name Description
Disable WMM Advertise
Check to stop the wireless from advertising Wireless Multimedia (WMM) functionality.
WMM provides basic Quality of Service (QOS) for applications.
Enable Wireless Multicast Forwarding
Check to enable Wireless Multicast Forwarding (WMF). Forwards multicast traffic across
wireless clients when enabled.
SSID Enter the the Wi-Fi Service Set Identifier (SSID) here.
BSSID
Enter the Basic Service Set Identifier (BSSID). Provides the MAC address assigned to the
wireless router.
Country Set the country in which the gateway is deployed.
Max Clients [1-16] Define the maximum number of clients that can access the router wirelessly.
If desired, up to three virtual access points for guest use may be defined.
Enabled Check to Enable a virtual wireless access point for guest access.
SSID Enter your desired wireless Service Set Identifier (SSID) here.
Hidden Check this option to hide the SSID from being broadcasted publicly.
Isolate Clients Check to prevent client PC’s from communicating with one another.
Disable WMM Advertise Check to stop the wireless from advertising Wireless Multimedia (WMM) functionality.
Enable WMF Check to enable Wireless Multicast Forwarding (WMF).
Enable HSPOT Check to enable wireless Hotspot2.0
BSSID N/A
Security
Utilize this screen to configure security features of the wireless LAN interface.
You may configuration it manually or via Wi-Fi Protected Setup (WPS).
After selecting Wireless -> Security from the left navigation bar you may modify settings as desired.
Click Apply/Save to commit your settings.
NOTE: When both STA PIN and Authorized MAC are empty, PBC becomes the default value.
If Hide Access Point is enabled or the MAC filter list is empty with "allow" chosen, WPS2 will be disabled.
To Next Page
Loading...
