SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014 83
Manual Setup - Network Authentication: WPA
WPA Authentication requires the same set of parameters as used with 802.1X (above) with but with the two parameters added: WPA Group
Rekey Interval and WEP Encryption. Reference the above table for field descriptions not found in the table for WPA below.
The individual fields on this screen are defined as follows:
Field Name Description
WPA Group Rekey Interval
[1-65535 seconds] The frequency with which the gateway automatically updates the group key and sends it
to connected LAN client devices.
WPA/WAPI Encryption
[AES, TKIP+AES] Choose from Advanced Encryption Standard (AES) or AES combined with Temporary Key
Integrity Protocol (TKIP). This field has been pre-populated with the option most complimentary to the
Network Authentication selected.
Manual Setup - Network Authentication: WPA-PSK
To Next Page
Loading...
