SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014 90
The individual fields on this screen are defined as follows:
Field Name Description
AP Mode
[Wireless Bridge, Access Point] Select Wireless Bridge to disable Access Point functionality. Select Access Point
enables AP functionality. In Access Point mode, wireless bridge functionality will still be available and wireless
stations will be able to associate to the AP.
Bridge Restrict
[Enabled, Disabled] Optional setting to turn off wireless bridge restriction. When disabled, any wireless bridge
will be granted access. Choose Enabled or Enabled (Scan) to turn on wireless bridge restriction. Only those
bridges selected in the Remote Bridges list will be granted access. Use the Refresh button to update the
station list when Bridge Restrict is enabled.
Remote Bridge MAC Address Enter the MAC address(es) of the remote bridges to be allowed
Advanced
At Wireless -> Advanced you may configure advanced features of the wireless LAN interface. You can select a particular channel on which to
operate, force the transmission rate to a desired speed, set the fragmentation threshold, the RTS threshold, the wakeup interval for clients in
power-save mode, and more.
After selecting Wireless -> Advanced from the left navigation bar, enter your settings as desired.
Click Apply/Save to commit your changes.
To Next Page
Loading...
