SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2014 93
Field Name Description
DTIM Interval
[1 and 65535] a.k.a. Beacon rate, Delivery Traffic Indication Message is a countdown variable indicating when the
next window for listening to buffered broadcast and multicast messages is available to client devices.
The default is 1.
Beacon Interval
[1 and 65535 ms] The time interval between beacon transmissions. Beacon transmissions make known the
presence of an access point and convey to wireless NICs when to awake from power save mode to check for
buffered frames at the access point).
The default is 100 ms.
Global Max Clients [1-255] The maximum number of client devices that can connect to the router.
Xpress TM Technology
[Enabled, Disabled] Xpress Technology is compliant with draft specifications of two planned wireless industry
standards
Transmit Power Set the desired output power (by percentage).
WMM (Wi-Fi Multimedia)
[Auto, Enabled, Disabled] When enable, this technology allows multimedia services (audio, video and voice
packets) to get higher priority.
WMM No Acknowledgement
[Enabled, Disabled] Refers to the acknowledge policy used at the MAC level. Enable no Acknowledgement for
better throughput but in the event of a noisy RF environment, higher error rates may result.
WMM APSD [Enabled, Disabled] Automatic Power Save Delivery, a power consumption saving feature.
Station Info
This page displays authenticated wireless stations and their status.
Diagnostics
Line performance diagnostic tools are supported by your SmartRG gateway. Three legs of the data path are included in the available tests: LAN
connectivity, DSL connectivity and Internet connectivity tests.
To Next Page
Loading...
