93
Scope Multimeter Navigation
1— Scope Multimeter Toolbar
2— Main Body
3— Trace Details
4— Record/Playback Control Toolbar
Figure 8-11 Scope Multimeter screen layout
Scope Multimeter Toolbar
The Scope Multimeter toolbar is used to set up the tool for testing and to configure the settings for
each trace. The table below gives brief descriptions of the control icons on the toolbar:
Table 8-4 Scope Multimeter toolbar icons (part 1 of 2)
Name Icon Description
Back Returns to the previously viewed screen.
Setup
Opens a dialog box that allows you to select
personal preferences for viewing and saving data.
Data
Switches the trace information displayed at the base
of the screen between three available states.
Cursors
Opens a dialog box that allows you to switch cursors
on and off, and to reposition them on the screen.
Refresh Updates data on the viewing screen.
To Next Page
Loading...
