61
Scan Module Operation Troubleshooting
5.5.4 Recovery Procedure
This is a quick and easy method that reestablishes connectivity between the diagnostic tool and
the Scan Module in most instances. If bluetooth connectivity remains unavailable following
recovery, use one of the alternate procedures to restart the system.
i This product is intended to be used by professional technicians in a garage environment.
Electrostatic discharges may happen occasionally and cause a loss of communication. To restore
communication disconnect and reconnect the communication cables and follow screen prompts.
z To recover wireless connectivity:
1. Disconnect the Scan Module from the vehicle.
2. Navigate to the Home Screen on the diagnostic tool.
3. Select Exit to close the ShopStream Diagnostic Suite.
4. Connect the Scan Module to the vehicle.
5. Select the ShopStream Diagnostic Suite icon on the desktop.
Figure 5-7 Sample ShopStream Diagnostic Suite desktop icon
i The ShopStream Diagnostic Suite can also be started from the Windows Start menu.
Alternate Recovery Procedures
Use these methods as an option to the Recovery Procedure, or when recovery fails to restore the
wireless connection.
USB Procedure
This method establishes a “hard-wired” USB cable connection between the modules.
z To create a USB connection:
1. Carefully slip the ends of the handgrip off of the sides of the Scan Module housing.
2. Lift open the hinged cover on the base of the Scan Module.
To Next Page
Loading...
Need help?
General
