159
Operation on LCD
Setting Language
This inverter provides multiple languages for customers to choose, such as
English, Deutsch, francais, Polskie, Espanol, Português and Italiano.
Select Language in the User Setting interface, press Enter to enter the Language
interface. Press Up or Down to select the display language based on actual need.
Press Enter to confirm the language.
=====Language=====
Select:
> English <
Figure 9-27 Setting system language
Setting EPS Mute
You set Yes in the EPS Mute interface, the buzzer mutes when the inverter enters
EPS mode. When you set No, the buzzer can be heard every 4 seconds when the
inverter enters EPS mode.
Default setting: No.
=====EPS Mute=====
Mute
No<
Figure 9-28 Turning on/off the EPS reminder
Setting Self Use Mode
»
Setting Min SoC
Min SoC means the minimum battery SoC, and the battery won't discharge power
when the actual battery SoC reaches this value.
Default Min SoC: 10%; range: 10%~100%
===Self Use Mode===
Min SoC:
10%
===Self Use Mode===
>Min SoC
Charge from grid
Figure 9-29 Set Min SoC
»
Setting Charge from grid
Charge from grid means you can set whether the inverter can charge from the
grid. Disable means the inverter is not allowed to charge from the grid.
Default setting: Disable
Charge battery to means the utility grid is allowed to charge the battery to this
value when Charge from grid is set Enable.
To Next Page
Loading...
Need help?
General
