186
Operation on LCD
»
Set EV Charger / AdaptBoxG2 COM STAT Connected or Disconnected
=====Internal485=====
EV Charger COM STAT
> Disconnected <
=====Internal485=====
AdaptBoxG2 COM STAT
> Disconnected <
Figure 9-99 Connecting or disconnecting the external device
Setting Battery Charge EVC
You can set Enable/Disable to control whether the battery can discharge energy
to an EV Charger.
Enable: the battery can discharge energy to an EV Charger.
Disable: the battery cannot discharge energy to an EV Charger.
==Battery charge EVC==
Function Control
> Disable <
Figure 9-100 Enabling/ disabling Battery Charge EVC function
Setting MicroGrid
Here you can enable MicroGrid fuction if an on-grid inverter is connected.
Default setting: Disable.
=====MicroGrid=====
MicroGrid
> Disable <
Figure 9-101 Enabling/ disabling MicroGrid function
Setting Advance Password
You can reset the password in the Advance Password interface. Please contact
the SolaX after-sales team for the default Advance Password to enter Advance
Setting or reset Advance Password.
==Advance Password==
0 0 0 0
==Advance Password==
Set OK!
==Advance Password==
Setting failed!
Figure 9-102 Resetting Advance Password
To Next Page
Loading...
