SolaX Power X3-IES Series User Manual

185
Operation on LCD
Setting Pgrid Bias
That the inverter dischages more energy to the grid or charges more from the
grid can be selected or set in the Pgrid Bias interface.
Disable: disabling this function
Grid: the inverter will discharge more energy to the grid.
INV: the inveter will be biased to charge power from the grid.
=====Pgrid Bias=====
Pgrid Bias
> Disable <
=====Pgrid Bias=====
Pgrid Bias
> Grid <
=====Pgrid Bias=====
Pgrid Bias
> INV <
Figure 9-95 Setting the Pgrid bias
Setting Internal485
Here items in Internal485 interface can be set to achieve communication with
SolaX devices.
»
Set COM485 / EV Charger / DataHub / AdaptBoxG2 / EVC&AdaptBoxG2
=====Internal485=====
Function Control
>COM485<
Figure 9-96 Selecting the external device
»
Set Braud Rate
=====Internal485=====
Braud Rate:
19200
Figure 9-97 Setting the braud rate
»
Set the Address of different devices
=====Internal485=====
COM485 Address:
1
=====Internal485=====
EV Charger Addr:
70
=====Internal485=====
AdaptBoxG2 Addr:
96
Figure 9-98 Setting the address of the external device

SolaX Power X3-IES Series Specifications

General

Brand	SolaX Power
Model	X3-IES Series
Category	Inverter
Language	English