IV
mode.)
Update Chapter 2.3.2 Control Panel and Indicators (Optimized the control
logic and added a note that when an inverter is in an idle state, the work
mode, the min SOC under different work modes and the charging periods
can be reset.)
Update Chapter 13 Technical Data (Added Australian certification
parameters of rated AC output apparent power and Max. AC output
apparent power in 5/10/15 kW inverters. And added a 4K inverter.)
Update Chapter 5.2 Scope of Delivery (Changed the standard accessory .)
Update Chapter 7.2.5 Monitoring Connection (Rewrote the installation
produres of the monitoring module)
Version 00 (2023-09-25)
Initial release
To Next Page
Loading...
Need help?
General
