III
"X3-Matebox G2" is a device that integrates switches and a bidirectional
electricity meter. This optional component can be installed when the
X3-IES system is not connected in parallel, as it provides centralized
management of the power supply to the home.
Target Group
The installation, maintenance and grid-related setting can only be
performed by qualified personnel who
• Are licensed and/or satisfy state and local jurisdiction regulations.
• Have good knowledge of this manual and other related documents.
Conventions
The symbols that may be found in this manual are defined as follows.
Symbol Description
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION!
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE!
Provides tips for the optimal operation of the
product.
Change History
Version 02 (2024-01-30)
Update and add installation procedures for X3-Matebox G2.
Update the contact information.
Update 5.2 Scope of Delivery (Changed the number of rotation wrench
from 4 pcs to 1 pc)
Update 2.3.4 Symbols on the Label and Devices of X3-IES System (Deleted
the icon UKCA and its explanation)
Version 01 (2024-01-10)
Update the style of the document.
Version 01 (2023-12-06)
Update Chapter 2.4 Working Principle (Changed Schedule mode as TOU
To Next Page
Loading...
