SolaX Power X3-IES Series User Manual

68
Mechanical Installation
Step 14: Place the BMS, and then tighten the M5*14 screws on both sides (torque: 2.2-2.5
N·m)
Figure 6-22 Placing the BMS
M5*14
2.2-2.5 N·m
Figure 6-23 Tightening M5 screws
NOTICE!
• Please make sure that the corners and edges of the BMS and battery module are
aligned before tightening screws.

SolaX Power X3-IES Series Specifications

General

Brand	SolaX Power
Model	X3-IES Series
Category	Inverter
Language	English