Sonel MPI-540 User Manual

MPI-540 – USER MANUAL
122
4.5 Analyzer settings
On the Analyzer settings screen it is possible to:
 specify the manner of clamps fastening,
 change the phase identification,
 view files stored in the recorder mode.
4.5.1 Hardware settings – clamps (manner of connecting)
If the clamps have not been attached in accordance with the direction of the current flow, this infor-
mation can be entered into the meter. Then the recorder readings will be automatically corrected. This
is useful in situations where the physical reversing of clamps is impossible or difficult.

Sonel MPI-540 Specifications

General

Brand	Sonel
Model	MPI-540
Category	Measuring Instruments
Language	English