Sonel MPI-540 User Manual

MPI-540 – USER MANUAL
24
2.3 Communication
2.3.1 USB communication
The B-type USB port built-in in the meter is used to connect the meter to the computer in order to
download the data stored in its memory. The data may be downloaded and read through the software
provided by the manufacturer.
 Sonel Analysis – the software provides support for the meter's recorder all PQM series an-
alysers. It enables data reading from the recorder and data analysis.
 Sonel Reader – the software is used to retrieve the data saved from the meter memory. In
addition, it enables data transfer to the PC, data saving in popular formats and printing.
 Sonel Reports PLUS – supports creation of documentation after testing of electrical instal-
lation. Software communicates with Sonel test instruments, download data from memory of
test instrument and creates necessary documentation.
Detailed information is available from the manufacturer and distributors.
Connect the cable to the USB port of the computer and the USB slot of the meter.
Start the program.
Current versions of software may be found at website www.sonel.pl/en in section
Download.
2.4 Update
NOTE!
 Before you proceed to software update, charge the accumulators.
 Do not switch off the meter while updating.
The update file can be downloaded from the manufacturer's website (www.sonel.pl).
Save the file to a USB drive. The memory must have the FAT32 file system.
Select Settings > Update to open
the update menu.

Sonel MPI-540 Specifications

General

Brand	Sonel
Model	MPI-540
Category	Measuring Instruments
Language	English