Sonel MPI-540 - Insulation resistance

MPI-540 – USER MANUAL
83
3.8 Measurement of insulation resistance
WARNING
The tested object must not be live.
3.8.1 Settings of measurements
Select item R
ISO
.
Connect the meter probe or the
adapter which the measurements
will be performed with.
Touch the drop down menu to set
the measuring mode.
Positions will vary depending on
whether the following have been
connected to the meter:
probes,
UNI-Shuko adapter,
AutoISO-1000c adapter
If separate leads with probes
have been connected to the me-
ter, select the required option from
the menu:
single measurement mode,
continuous measurement
mode.