Connect the adapter to the test
socket.
Press START to start measure-
ment.
If any of the voltages exceeds al-
lowable voltage value (50 V), Ob-
ject under voltage message is
displayed and the measurement
is blocked.
During the measurement the
H.V./REC/CONT. diode is lit in
orange.
View of the screen during meas-
urement.
The display shows the symbol of
the resistance being measured
and the progress bar of this
measurement.
The progress bar indicates the
status of the measurement.
The measurement may be can-
celled at any time using the
icon.
To Next Page
Loading...
