Thesubtitle languagecannotbe changedor
turnedoff.
Muhilingual subtitles are not recorded on the
DVD VIDEO.
The DVD VIDEO prohibits changing of the
subtitles.
Try changing the subtitle using the DVD
VIDEO's menu.
The subtitles cannot be changed for the titles
recorded on this recorder.
Theangles cannotbe changed.
Muhi-angles are not recorded on the DVD
VIDEO being played.
You are twing to change the angles when "_"
does not appear in the front panel display
(page 59).
The DVD VIDEO prohibits changing angles.
Try changing the angle using the DVD VIDEO's
lIlen_.l.
The angles cannot be changed for the titles
recorded on this recorder.
TheMP3 audio trackcannotbe played.
The DATA CD is not recorded in the MP3
format that conforms to ISO9660 Level 1/
Level 2.
The MP3 audio track does not have the extension
".MP3."
The data is not I\)x_natted in MP3 even though it
has the extension ".MP3."
The data is not MPEGI Audio Layer 3 data.
The player cannot play audio tracks in MP3PRO
format.
TheJPEGimage file cannotbe played.
The DATA CD is not recorded in JPEG fonnat
that conforms to ISO9660 Level l/Level 2.
The JPEG image file does not have the extension
".JPG" or ".JPEG."
The data is not formatted in JPEG even though it
has the extension ".JPG" or "JPEG."
Length or width of the image is more than
4,720 dots.
Thetitle ofthe MP3 audioalbum/trackor JPEG
image album/file is not correctlydisplayed.
The player can only display numbers and
alphabet. Other characters are displayed as
asterisks.
DVDRecording/Timerrecording/
Editing
Thechannelcannotbe changedfromthe
channelyou are recording.
Set the TV's input som-ce to "TV."
Recordingdoesnotstart immediatelyafteryou
press • REC.
Operate the recorder only after "LOAD."
"FORMAT," or "INF WRITE" disappears from
the front panel display.
Nothing was recordedeventhoughyou set the
timer setting correctly.
There was a power l=ailure during recording.
Disconnect the AC power cord from the AC
omlet, and connect it again.
The prograln contains copy protection signals
that restrict copying.
The prograln that stalts first has priority and the
second program starts recording only after the
first program has finished. If the programs start
at the same time. the program listed first in the
menu has priority (page 51).
There is no DVD inside the recorder.
There is not enough disc space for the recording.
Recordingdoesnotstop immediatelyafteryou
press • STOP.
It will take a few seconds for the recorder to input
disc data before recording can stop.
Timerrecordingis notcompleteordidnotstart
fromthe beginning.
There was a power l'ailure during recording. If
the power recovers when there is a timer
recording, the recorder resumes recording.
The clock is automatically set by EDS, but it is
reset chLring a power failure when the EDS signal
cannot be received (page 99).
The prograln that stalts first has priority and the
second program starts recording only after the
first program has finished. If the programs start
at the same time. the program listed first in the
lnenu has priority (page 51).
Disc space was not enough.
110
To Next Page
Loading...
