General
Power requirements
120 V AC, 60 Hz
Power consumption
42 W
Power back-up
Back-up duration: 0 rain
Operating temperature
5°C to 35°C (41°F to 95°F)
Storage temperature
20°C to 60°C @4°F to 140°F)
Operating humidity
25% to 80%
Dimensions including projecting parts
and controls (w/h/d)
Approx. 430 × 85 × 334 mm
(Approx. 17 × 3.4 × 1314 inches)
Mass
Approx. 5.9 kg (Approx. 13.0 lbs)
Supplied accessories
Remote commander (remote) (1)
Size AA (R6) batteries (2)
Antenna cable (1)
Audio video cord (1)
Design and specifications are subject to change
without notice.
About i.LINK
The DV IN jack on this recorder is an i.LINK-
compliant DV IN jack. This section describes the
i.LINK standard and its features.
What is i.LINK?
i.LINK is a digital serial interface for handling
digital video, digital audio and other data in two
directions between equipment having the i.LINK
jack, and/'or controlling other equipment.
i.LINK-compatible pieces of equipment can be
connected by a single i.LINK cable. Possible
applications are operations and data transactions
with various digital AV equipment. When two or
more i.LINK-compatible equipment are
connected to this recorder in a daisy chain,
operations and data transactions are possible with
not only the equipment that this recorder is
connected to but also with other devices via the
directly connected equipment.
Note, however, that the nrethod of operation
sometimes varies according to the characteristics
and specifications of the equipment to be
connected, and that operations and data
transactions are sometimes not possible on some
connected equipment.
I I_
Nmmally, only one piece ofequipment can be connected
to tbis recorder by the i.LINK cable (DV connecting
cable). When connecting this recorder to i.LINK-
compatible equipment having two or luo_e i.LINK jacks
(DV jacks), see the instruction manual of tbe equipment _.
to be cozmected. _-
g
About the name "i.LINK" _-
=Z
i.LINK is a more familiar term for IEEE 1394 data
transport bus proposed by SONY, and is a _.
trademark approved by many corporations.
IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
,._co_t_.ea115
To Next Page
Loading...
