Sony RDR-VX500 - Recording to VHS Tapes; Recording a Program to a VHS Tape

5 Press A OPEN/CLOSE,and place a
recordabledisconthe disctray.
Recordinga Programto a
VHSTape
t_
!3 Press _ OPEN/CLOSEto close the disc
tray.
Wait until "LOAD" disappears from the front
panel display.
Unused DVD-RWs are formatted m VR mode
automatically.
To format m Video mode, see page 43.
7 PressCH+/- or INPUTSELECTto selectthe
channelorinputsource you want torecord.
8 Press RECMODErepeatedlyto select the
recordingmode.
Each time you press the button, the display
changes on the TV screen as follows:
HQ'_ HSP "_ SP "_ LP "_ EP "_ SLP
t U
For more details about the recording mode,
see page 47.
9 Press • REC.
"RE(?" appears in the front panel display and
recording starts.
Recording continues tmtil you stop the
recording or the disc is ful!.
To stoprecording
Press • STOP.
Note that it may take a few seconds tbr the
recorder to stop recording.
"_° Hint
This recmder can record o!1 various discs Select file disc
type according to your needs (page 10)
TV/DVD.VIDEO
switch
Q,r,,, we
o _,,,,i,,,,, VIDEO _.
c_¢ SELECT
ii
1 Turn onthe TV.
2 Press I1_.
The recorder turns on.
3 Switch the inputselector onyourTVso that
the signal fromtherecorderappearsonthe
TV screen.
When connecting the recorder to the TVusing
only the antenna cable, see "Setting the RF
04tpt.lt channel" on page 19.
4 Slide theTV/DVD.VIDEOswitch to
DVD.VIDEO,thenpressVIDEOto control
the VCR.
5 Inserta tape with itssafety tab in place.
6 PressCH +/- or INPUTSELECTto select the
channelor inputsource youwantto record.
,,,,_continued 39