7 Select"Video -+ DVD," and pressENTER.
The display lbr confirmation appears.
8 Select"OK," andpress ENTER.
Dnbbing starts.
Toselectthe recordingmode
Press DVD to control the DVD recorder, then
press REC MODE repeatedly.
Each time you press the breton, the display
changes on the TV screen as/bllows:
HQ-_- HSP _ SP =_ kP _ EP--_ SLP
f
For more details abont the recording mode, see
page 47.
select the soundTo
1 After step 2 above, press VIDEO to control
the VCR.
2 Press I2=>PLAY.
3 Press AUDIO repeatedly to select the sonnd
you want.
For details, see page 80.
4 Press || PAUSE.
5 Follow the instructions above from step 3.
Tostop dubbing
Press • STOP.
Note that it may take a few seconds lbr the
recorder to stop dnbbing.
To play discs recordedwith this recorderon
otherDVDequipment
Finalize the disc. For details, see page 44.
"_° Hints
• A black screen is lecorded at tile end of the dubbed disc
but this is not a malfimction. When dubbing stops, there
may be some time diffelence beiween the tape and the
disc. In this case, a black (no signal) screen is recorded
• You can switch the playback tape andio while dubbing.
• When dubbing a VHS tape to a disc, the VHS tape
comlter value may differ slightly from the DVD
recording time.
• The audio output is the VHS playback audio
• Dubbing is not possible in the following cases
When a non-zecozdable DVD is set.
When using VHS software with copy guard
fimctions.
• Dubbing stops in the following cases.
When the VHS tape is played back to the end and
stops.
When the VHS deck or the DVD deck is stopped
When the disc relnaming time _lms out.
• The System lnenu, TOOLS lnenu, and intbrmation
display are not displayed during dubbing.
• Copyrights
Recordings made flora VHS tapes and other
copyrighted material are solely tbr individual
enjoyment, and other mmuthorized use is prohibited
under copyright law.
Unauthorized editing of copyrighted material is
prohibited undm copyrigN law
90