Soundcraft Vi6™ User Guide Page 8 - 1
LAYERING (FADER PAGES)
GENERAL
Layers, or Fader Pages, allow the user to access different views of the DSP channel structure of the mixer,
on the control surface.
INPUTS
The Control Surface for the Soundcraft VI6™ contains four fully equipped Input Bays that allow direct
access and state information overview for 32 Input Channels.
Therefore two layers are required to allow operation for all 64 input channels.
Changing Layer is done by simply pressing the desired Input Fader Page key [A] or [B].
Figure 8-1: Desk In Layer A operation.
1
32
25
24
CHANNEL
To Next Page
Loading...
Need help?
General
