Spectra Precision FOCUS 2 Series - Deleting a Job

SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
6 – Menu Key
102
Job settings
The following settings are set when a job is created, and cannot be changed. This is different to other
temporary settings. This ensures that the data in a job is correctly stored in the database, and that all
necessary corrections are applied when each record is stored.
To change the setting in the selected field, press [<] or [>].
To move between fields, press [^] or [v]. Alternatively, to move to the next field, press [REC/ENT].
To automatically create a new job, press [REC/ENT] in the last field (HA).
Deleting a job
1. In the Job list, move the cursor to the job to be deleted
by pressing the
[^] or [v] key.
2. Press the DEL softkey. A confirmation screen appears.
3. Confirm that this is the job to be deleted. Press [REC/ENT]
or the
OK softkey.
To cancel the deletion and return to the previous screen,
press
[ESC] or the Abrt softkey.
Scale Factor 0.99000 to 1.001000
T-P crn ON, OFF
SeaLevel ON, OFF
C&R crn OFF, 0.14, 0.200
Angle DEG, GON, MIL
Dist. Meter, USA Feet, USA Inch, IntlFeet, IntlInch
Temp. °C, °F
Press hPa, mmHg, inHg
VA 0 Zenith, Verticl, Vert ±90°
AZ 0 North, South
Order NEZ, ENZ
HA Azimuth, 0 to BS