Spectra Precision FOCUS 2 Series - E031; E032; E033; E034

SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
9 – Error Messages
144
E031
Angle error 1.
Shut off the instrument and then power on. If the error code appears again, send the instrument for
repair.
E032
Angle error 2.
Shut off the instrument and then power on. If the error code appears again, send the instrument for
repair.
E033
Angle error 3.
Shut off the instrument and then power on. If the error code appears again, send the instrument for
repair.
E034
Vertical angle error 4.
Shut off the instrument and then power on. If the error code appears again, send the instrument for
repair.
E035
Horizontal angle error 5.
Shut off the instrument and then power on. If the error code appears again, send the instrument for
repair.
E036
Horizontal angle error 6.
Shut off the instrument and then power on. If the error code appears again, send the instrument for
repair.