Spectra Precision FOCUS 2 Series User Manual

SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
6 – Menu Key
129
[USR] key settings
1. From the main menu, press [6] (or press [v] and [REC/ENT]) to select 1 Sec.
The 1Sec key menu appears.
2. Press [3] (or press [v] and [REC/ENT]) to select [User].
3. There are two [USR] keys. The function that is assigned to
each key appears beside the key name.
– To change the settings for the [USR1] key, press [1] or
select
User1.
– To change the settings for the [USR2] key, press [2] or
select
User2.
4. Press [v] or [^] to select the required function and then
press
[REC/ENT]. If an item on the list has an arrow next to
it, and you select this item, the whole menu is assigned to
the key. To assign a specific function from the sub-menu,
press
[^] or [v] to select the function and then press
[REC/ENT].
5. When the settings are complete, press [REC/ENT] to return
to the 1 Sec. key menu.
Note – In the Select Functions screen, the asterisk (*) indicates the function that is currently assigned
to the key.
B
Tip – You can also access the settings screen by holding down [USR1] or [USR2] for one second.
[S-O] key settings
1. From the main menu, press [6] (or press [v] and [REC/ENT]) to select 1 Sec.
The 1Sec. key menu appears.
2. Press [4] (or press [v] and [REC/ENT]) to select [SO].

Spectra Precision FOCUS 2 Series Specifications

General

Brand	Spectra Precision
Model	FOCUS 2 Series
Category	Measuring Instruments
Language	English