SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
6 – Menu Key
127
7. Press the Job softkey and then press [v] / [^] to select the job in which to load the data. Press
[REC/ENT] to return.
8. To set the communication parameters, press the Comm softkey.
– To change any items so that they match the settings in the communication software, press [v]
/
[^].
– To change the item options, press [<] / [>]. Press [REC/ENT] to return.
9. The default data format appears. To change the order of the data fields, press the Edit softkey.
Press
[<] / [>] to select a job and then press [REC/ENT] or the Save softkey.
10. Once the settings have been completed on the instrument, press the Strt softkey.
11. On the computer, click OK.
12. To stop the transfer, press the Stop softkey on the instrument. Once the transfer is complete,
the Comm menu appears.
Uploading a point name list or code list
1. Use the communication cable to connect the instrument to a computer, and then start the
communication software.
2. Select COM / PC > Total Station. Navigate to and select the PT List file to upload.
3. The system prompts for confirmation before starting the transfer. Before clicking OK, first
complete Step 5 through Step 7 on the total station.
4. On the total station, in the main menu, press [5] (or press [v] and [REC/ENT]) to select Comm.
The Comm menu appears.
5. Press [3] (or press [v] and [REC/ENT]) to select PT List.
The PT List screen appears.
6. To set the communication parameters, press the Comm
softkey. Ensure that the total station settings are
consistent with those set in the communication software.
7. On the instrument, press the Strt softkey.
8. On the computer, click OK.
9. To stop the transfer, press the Stop softkey on the instrument. Once the transfer is complete,
the Comm menu appears.
Note – When uploading a code list, it always replaces the existing code list on the instrument. A
maximum of 256 codes or point names can be stored.
To Next Page
Loading...
