Steketee EC-WEEDER - Page 125

E
Earthing-up tools .........................36
Earthing-up share ......................36
Flat heelers .......................... 36
Ridger .............................. 37
Ridging body ......................... 37
Electrical power, required ..................114
Electrics
Maintenance ........................ 102
Equipment variants ........................ 1
Error correction ......................... 109
Errors
Causes and remedies .................. 110
Eliminating correctly ...................109
F
Finger weeder ...........................34
Adjust .............................. 79
lubrication .......................... 105
Finger weeder arm
Hydraulically ......................... 61
Mechanically ......................... 57
Overview ............................27
Frame .................................99
G
GPS
Lift and lower hoeing elements ............ 64
Section Control ....................... 64
Steering discs .........................64
H
Harrow ................................ 32
Hazardous areas .......................... 8
Headstock ..............................26
Visual inspection ...................... 99
High-pressure cleaner ..................... 95
Hoeing disc
Adjust .............................. 84
Hoeing elements
Adjust working depth ...................85
Check and adjust distances ............... 73
Lift and lower hydraulically ............... 61
Lifting and lowering mechanically .......... 57
Overview ............................27
Hoeing process
Overview of steps ......................54
Preconditions .........................54
Hoeing tools
Adjust .............................. 76
Hydraulic power, required ................. 114
Hydraulics
Check connections .................... 102
Check hoses .........................101
Maintain ........................... 101
Replacing hoses ...................... 102
I
Identication ............................24
Implement
attachment .......................... 44
Detachment ..........................96
lubrication .......................... 104
Implement weights ...................... 113
Initial adjustments ....................... 66
Initial commissioning .......................1
Intended use .............................5
ISOBUS
Operation terminal .....................39
K
Knife
Check sharpness ......................103
Dependence on the soil condition .......... 55
L
L-blade ................................31
Adjust .............................. 78
Index
en-GB | Item no. 17513597 | BA 02/05-2022 119