Instruction Manual
for
AS380 Series Elevator Integrated Drive Controller
150
F182 Slow down switch series 0 0～10 × 0: determine
automatically by
speed
F183 Learn trip speed 0.800 0～1.000 m/s
F186 Creeping time at startup 0.50 0～10.00 s
F187 Monitor items 0 0～255 ×
F193 No-load compensation on
the bottom floor
50.0 0～100.0 %
F194 Full-load compensation on
the bottom floor
50.0 0～100.0 %
F195 No-load compensation on
the top floor
50.0 0～100.0 %
F196 Second base station at
Duplex
0 0～64 ×
F200 inverter software version
Factory
setup
× Read-only
F201 Inverter drive mode 3 0/1/2/3 ×
Set inverter basic
mode:
0:Vector control
without speed sensor
2:Torque control with
speed sensor
3:Vector control with
speed sensor
F202 Motor type 0 0 / 1 ×
0: Asynchronous
1: Synchronous
F203 Motor rated power
By
Inverter
parameter
0．40～
160．00
KW
F204 Motor nominal current
By
Inverter
parameter
0．0～300．0A
F205 Motor nominal frequency 50.00
0.00～
120.00
Hz
F206
Motor nominal rotation
speed
1460 0～3000 rpm
F207 Motor nominal voltage
By
Inverter
parameter
0.～460 V
F208 Number of poles of motor 4 2～128 ×
F209
Motor nominal slip
frequency
1.40 0～10.00 Hz
To Next Page
Loading...
Need help?
General
