STEP AS380-4T07P5 User Manual

Instruction Manual for AS380 Series Elevator Integrated Drive Controller
94
5.2.4.4 Method to check monitor status
Take fault check recording 1 as an example:
Seria
l No
Key Operator status Remark
0
------
Elevator status window
1
Enter function selection window
2
Enter secondary window
4
Press and to select upper or lower item
3
View fault record
4
And are used for page down and page up.
5
View fault information
Table 5.4 how to view failure history
Note: Time format in fault information is shown in yy/mm/dd/hh/mm, in which each one
take 2 bit.
For other function in monitoring status, take the above table for operation, Use
and
for page down and page up.
5.2.4.5 Parameter setting
Take the setting of F11=12 as an example:
Seria
l no
Key Operator status Remark
0
-----
Elevator status window

STEP AS380-4T07P5 Specifications

General

Brand	STEP
Model	AS380-4T07P5
Category	Controller
Language	English