STEP AS380-4T07P5 User Manual

Instruction Manual for AS380 Series Elevator Integrated Drive Controller
98
Now take resetting parameter F as an example:
Table 5.12.F parameter reset operation
Seria
l no
Key Display status Remark
0
——
Elevator status window
1
Enter function selection window
2
Press 3 times
3
4
Users must enter check code 5678 to
prevent mishandling, operation like entering
password.
5
Enter check code 5678
6
Press ENTER for reset, if it successes,
“Reset successful” will be shown; if “Reset
unsuccessful”, please check whether this
operation is needed in the inspection
condition.
The time setting is a little different from parameter F setting, now take time set of year 2006,
month 10, date10, hour 15, minute 20 for example:
Step Key Operator status Remark
0
-----------
Elevator status window
1
Enter function selection window
2
Press 4 times

STEP AS380-4T07P5 Specifications

General

Brand	STEP
Model	AS380-4T07P5
Category	Controller
Language	English