137
DEFRNLIT           EN
0478 131 9965 A - EN
3. Time:
The current time is indicated in 24 hour 
format.
4. Mobile radio signal:
The signal strength of the 
mobile radio connection is 
indicated using 4 bars. The 
more bars visible, the better 
the reception.
A reception symbol with a 
small x indicates that there is 
no connection with the 
Internet.
A question mark is shown 
during initialisation of the radio module 
(checking hardware and software, 
e.g. after switching on the robotic mower).
11.4 Main menu
The main menu is displayed,
– when the status screen (Ö 11.2) 
is left by pressing the OK button,
– when the Back button is pressed in the 
second menu level.
1. Start (Ö 11.5)
Mowing time
Starting pt.
Mowing on
2. Drive home (Ö 11.6)
3. Mowing plan (Ö 11.7)
Automatic mowing
Mowing duration
Active times
New mowing plan
4. More (Ö 11.8)
Lock iMOW®
Edge mowing
Settings
Information
11.5 Start
1. Mowing time:
The mowing time can be defined.
2. Starting pt.:
The starting point where the robotic mower 
starts mowing can be selected. This 
selection is only available if starting points 
are defined and if the robotic mower is in 
the docking station.
3. Mowing on:
The area to be mown can be selected. 
This selection is only available if there is a 
secondary area installed.
11.6 Drive home
The robotic mower travels back 
to the docking station and 
charges the battery. If automatic 
mowing is switched on, the 
robotic mower will mow the mowing area 
again at the next possible active time.
11.7 Mowing plan
Automatic mowing
On - Automatic mowing is switched on. 
The robotic mower mows the lawn until the 
next active time.
Off - All active times are disabled.
Pause today - The robotic mower 
suspends automatic mowing until the next 
day. This selection is only available if there 
are more active times scheduled on the 
current day.
Mowing duration
The weekly mowing duration can be 
set. This setting is only possible with 
the mow plan type "Dynamic". The 
preset value is adapted to the size of the 
The robotic mower can also be sent 
back to the docking station using 
the app. (Ö 10.)