0478 131 9965 A - EN
112
* must be separated from the cardboard
insert in the packaging.
For a quick, easy and robust installation,
read and comply with the specifications
and instructions, especially the wire
clearance of 28 cm during routing. (Ö 12.)
It is possible to increase the mown area by
routing the perimeter wire closer to the
edge. (Ö 12.17) For reliable operation, the
wire clearance must be adapted to the on-
site conditions during routing.
iMOW® quick guide
A separate quick guide on installing the
docking station and routing the perimeter
wire is enclosed with the robotic mower to
assist you. More detailed information can
be found in the respective chapters of this
instruction manual. Always use the quick
guide in combination with the instruction
manual for the robotic mower.
8. Standard equipment
Item Designation Qty.
A Robotic mower 1
B Docking station 1
C Power supply unit 1
D iMOW® Ruler* 2
E Peg for docking station 4
F Puller for carrier plate 1
G AKM 100 1
H Wire connector 2
I Corridor template* 1
Instruction manual 1
9. Initial installation
To Next Page
Loading...
