0478 131 9965 A - EN
98
2.1 General
This instruction manual constitutes
original manufacturer’s instructions in
the sense of EC Directive 2006/42/EC.
STIHL is continually striving to further
develop its range of products; we therefore
reserve the right to make alterations to the
form, technical specifications and
equipment level of our standard
equipment.
For this reason, the information and
illustrations in this manual are subject to
alterations.
This instruction manual may describe
models that are not available in all
countries.
This instruction manual is protected by
copyright. All rights reserved, especially
the right of reproduction, translation and
processing using electronic systems.
2.2 Country-specific versions
STIHL supplies machines with different
plugs and switches, depending on the
country of sale.
Machines with European plugs are shown
in the illustrations. Machines with other
types of plug are connected to the mains in
a similar way.
Installation 140
Setting starting points 141
Direct drive home 142
Safety 143
Service 144
Information 144
Perimeter wire 145
Planning routing of the perimeter
wire 146
Making a sketch of the mowing
area 146
Routing the perimeter wire 147
Connecting the perimeter wire 147
Wire clearances – use
iMOW® Ruler 147
Acute corners 148
Confined areas 148
Installing linking sections 149
No-go areas 149
Secondary areas 150
Corridors 150
Guide loops for offset drive home 152
Accurate mowing along edges 153
Sloping terrain along the perimeter
wire 153
Installing reserve wire 154
Using wire connectors 154
Narrow edge clearances 154
Docking station 155
Docking station controls 155
Notes on mowing 156
General 156
Mulching 156
Active times 156
Mowing duration 156
Home area 157
Operating the machine 157
Preparation 157
Flap 157
Adapting the programming 157
Automatic mowing 158
Mowing independently of active
times 158
Docking the robotic mower 159
Charging the battery 159
Maintenance 160
Maintenance schedule 160
Cleaning the machine 160
Checking the mowing blade wear
limits 161
Removing and installing the
mowing blade 161
Sharpening the mowing blade 162
Removing and installing the carrier
plate 162
Finding a wire break 163
Storage and winter break 164
Removing the docking station 164
Standard spare parts 165
Accessories 165
Minimising wear and preventing
damage 165
Environmental protection 166
Removing the battery 166
Transport 167
Lifting or carrying the machine 168
Securing the machine (lashing) 168
EU - Declaration of conformity 168
Cordless electric robotic mower
(RMI) with docking station (ADO) 168
Technical specifications 169
Messages 170
Troubleshooting 176
Service schedule 180
Handover confirmation 180
Service confirmation 180
Installation examples 181
Open source software 185
2. Notes on the instruction
manual
To Next Page
Loading...
Need help?
General
