0478 131 9965 A - EN
168
21.1 Lifting or carrying the machine
Lift and carry the robotic mower at the front
carrying handle (1) and at the rear carrying
handle (2). Ensure that the mowing blade
always faces away from your body and
that there is sufficient distance between
the mowing blade and body, particularly
the feet and legs.
21.2 Securing the machine (lashing)
Secure the robotic mower on the load
floor. Fasten the machine as illustrated
using suitable fastening materials (straps,
ropes) for this purpose.
Secure any other machine components
being transported (e.g. docking station,
small components) against slipping.
22.1 Cordless electric robotic mower
(RMI)
with docking station (ADO)
Manufactured by:
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
ANDREAS STIHL AG & Co. KG declares
under our sole responsibility that
complies with the relevant provisions of
Directives 2006/42/EC, 2011/65/EU,
2006/66/EC, 2014/53/EU and has been
developed and manufactured in
accordance with the versions of the
following standards valid on the date of
manufacture:
EN 50636-2-107, EN 60335-1 Ed 5, EN
55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3
The notified body TÜV Rheinland LGA
Products GmbH, No. 0197, has reviewed
the conformity according to Annex III
Module B of the Directive 2014/53/EU and
issued the following EU type examination
certificate:
RT 60146397 0001
22. EU - Declaration of
conformity
Design: Lawn mower,
automatic and
cordless
Manufacturer's
brand:
STIHL
Type: RMI 522.0 C
Serial number: 6305
Design: Docking station
Manufacturer's
brand:
STIHL
Type: ADO 500
Firmware V 2.00
Serial number: xxxx
ETSI EN 301 489-1 V 2.2.0 (2017-03)
ETSI EN 301 489-3 V 2.2.1 (2017-03)
ETSI EN 303 447 V 1.1.1 (2017-09)
ETSI EN 301 489-52 V 1.1.0 (2016-11)
ETSI EN 301 511 V 12.5.1 (2018-02)
ETSI EN 303 413 V 1.1.1 (2017-12)
To Next Page
Loading...
Need help?
General
