STOBER 13 | Diagnostics
02/2019 | ID 442728.05
177
Pattern for the firmware update
The states of the green and red LEDs also apply as described during a live firmware update. In
the following exceptional cases, the three LEDs flash in different combinations and frequencies:
LEDs:
Green/Red/Red
Behavior Description
Off Deleting the first firmware memory
Rapid flashing
Off
Rapid flashing Copying the second firmware memory into the first
Off
Off
Chaser light Error during firmware update, service required
Tab. 178: States of the LEDs for firmware updates
To Next Page
Loading...
