Stober SI6A062 - Page 35

STOBER 5 | System configuration
02/2019 | ID 442728.05
35
5.1.6.2 Communication
The drive controller has two interfaces for the fieldbus connection on the top of the device as
well as an Ethernet service port on the front of the device. Cables for the connection are
available separately.
EtherCAT or PROFINET fieldbus system
Please specify the desired fieldbus system when placing your purchase
order for the base device.
EtherCAT cables
Ethernet patch cable, CAT5e, yellow.
The following designs are available:
ID No. 49313: Length approx. 0.2 m.
ID No. 49314: length approx. 0.35 m.
PC connecting cables
ID No. 49857
Cable for connecting the X9 service interface to the PC, CAT5e, blue,
5m.
USB 2.0 Ethernet adapters
ID No. 49940
Adapter for connecting Ethernet to a USB port.
Detailed information about the fieldbus connection can be found in the corresponding manual,
see chapter Detailed information [}245].
5.1.6.3 Braking resistor
STOBER offers braking resistors in different sizes and performance classes.
More detailed information can be found in the chapter Braking resistor [}65].
5.1.6.4 Choke
STOBER offers different chokes corresponding to your application.
More detailed information can be found in the chapter Choke [}71].