STONEX R6 Series - Pointsearch

R6,User Interface
12
Alphanumerickeypad
Thealphanumericalkeypadisusedtoentercharactersdirectlyintoeditablefields.
• Numeric fields:Canonlycontainnumericalvalues.Bypressingakeyofthekeypadthe
numberwillbedisplayed.
• Alphanumeric fields:Cancontainnumbersandletters.Bypressingakeyofthekeypad
thefirstcharacterwrittenabovethatkeywillbedisplayed.Bypressingseveraltimesyou
cantogglethroughthecharacters.Forexample:1‐>S‐>T‐>U‐>1‐>S....
Editfields
)
Ineditmodethepositionofthedecimalplacecannotbechanged.Thedecimalplaceisskipped.
Specialcharacters
2.6 Pointsearch
Description
Pointsearchisafunctionusedbyapplicationstofindmeasuredorfixedpointsinthememory
storage.
Itispossibletolimitthepointsearchtoaparticularjobortosearchthewholestorage.The
searchprocedurealwaysfindsfixedpointsbeforemeasuredpointsthatfulfillthesamesearch
)
ESCDeletesanychangeandrestoresthepreviousvalue.
Movesthecursortotheleft
Movesthecursortotheright.
Insertsacharacteratthecursorposition.
Deletesthecharacteratthecursorposition.
Character Description
* Usedaswildcardsinsearchfieldsforpointnumbersorcodes.Referto"2.6
Pointsearch".
+/‐ Inthealphanumericcharacterset"+"and"‐"aretreatedasnormalalphanu‐
mericcharacterswithnomathematicalfunction.
)
"+"/"‐"onlyappearinfrontofanentry.
Inthisexampleselecting2onanalphanumeric
keyboardwouldstarttheSetOutapplication.