STONEX R6 Series - Communication Settings

R6,Settings
27
FreePPMEntry
Thisscreenenablestheentryofindividualscalingfactors.Coordinatesanddistancemeasure‐
mentsarecorrectedwiththePPMparameter.Referto"14.7ScaleCorrection"fortheapplica‐
tionofthevaluesenteredinthisscreen.
EDMSIGNALREFLECTION
ThisscreenteststheEDMsignalstrength(reflectionstrength)instepsof1%.Enablesoptimal
aimingatdistant,barelyvisible,targets.Apercentagebarandabeepingsound,indicatethe
reflectionstrength.Thefasterthebeepthestrongerthereflection.
4.3 CommunicationSettings
Description
Fordatatransferthecommunicationparametersoftheinstrumentmustbeset.
Access
1) SelectSettingsfromtheMAIN MENU.
2) SelectCommfromtheSETTINGS menu.
COMMUNICATIONSETTINGS
ThefollowingfieldsareactiveonlywhenPort: RS232isset.
BTCode
TosetacodefortheBluetoothconnection.
)
ThissoftkeyisonlyavailableforZoom30
instruments.ThedefaultBluetoothcodeis
’0000’.
Field Description
Port Instrumentport.ForZoom30instruments,theoptionsareselectable.ForZoom
20instruments,thevalueissettoRS232andisuneditable.
RS232 Communicationisviatheserialinterface.
USB CommunicationisviatheUSBhostport.
Bluetooth CommunicationisviaBluetooth.
Automatically Communicationissettoautodetect.
Bluetooth On Bluetoothsensorisactivated.
Off Bluetoothsensorisdeactivated.