STONEX R6 Series - Page 26

R6,Settings
26
ATMOSPHERICDATAENTRY
Thisscreenenablestheentryofatmosphericparameters.Distancemeasurementisinfluenced
directlybytheatmosphericconditionsoftheairinwhichthemeasurementsaretaken.Inorder
totaketheseinfluencesintoconsiderationdistancemeasurementsarecorrectedusingatmos‐
phericcorrectionparameters.
Therefractioncorrectionistakenintoaccountinthecalculationoftheheightdifferencesand
thehorizontaldistance.Referto"14.7ScaleCorrection"fortheapplicationofthevaluesentered
inthisscreen.
PROJECTIONSCALE
Thisscreenenablesentryofthescaleofprojection.CoordinatesarecorrectedwiththePPM
parameter.Referto"14.7ScaleCorrection"fortheapplicationofthevaluesenteredinthis
screen.
IR-Contin-
uous
Forcontinuousdistancemeasurementswithprisms.
Foil FordistancemeasurementsusingRetroreflectivetargets.
RL-Default Fordistancemeasurementswithoutprisms.
RL-Contin-
uous
Forcontinuousdistancemeasurementswithoutprisms.
RL-Long Forlongrangedistancemeasurementswithprisms.
Type Circular StandardprismZPR100
GeoMaxConstant:0.0 mm
Custom Theusercandefinetheirownprism.
ConstantscanbeenteredinmminGeoMax Const:
Foil GeoMaxConstant:+34.4 mm
None RL-modes GeoMaxConstant:+34.4 mm
GeoMax
Const.
ThisfielddisplaystheGeoMaxprismconstantfortheselectedType:
WhereType:isCustom thisfieldbecomeseditabletosetauserdefined
constant.Inputcanonlybemadeinmm.
Limitvalue:‐999.9 mmto+999.9 mm.
Laser-Beam Off Visiblelaserbeamisdeactivated.
On Visiblelaserbeamforvisualisingthetargetpointisactivated.
)
WhenPPM=0isselected,theStonex
®
standardatmosphereof1013.25 mbar,12°C,
and60%relativehumiditywillbeapplied.
Field Description