STONEX R6 Series - 6 Functions; Overview

R6,Functions
32
6Functions
6.1 Overview
Description
FunctionscanbeaccessedbypressingFNCfromanymeasurementscreen.FNCopensthe
functionsmenuandafunctioncanbeselectedandactivated.
Functions
Function Description
Level & Plummet Activatesthelaserplummetandelectroniclevel.
Distance Offset Referto"6.2DistanceOffset".
RL/IR Change ChangesbetweenthetwoEDMmodes.Referto"4.2EDMSettings".
Delete Last Observ. Deletesthelastrecordeddatablock.Thiscanbeeitherameasure‐
mentblockoracodeblock.
)
Deletingthelastrecordisnotreversible!Onlyrecords
recordedinSurveycanbedeleted.
Code-Library StartsCodingapplicationtoselectacodefromacodelistorentera
newcode.SamefunctionalitylikethesoftkeyCODING.
Laserbeam Activates/deactivatesthevisiblelaserbeamforilluminatingthe
targetpoint.
Screen ill. On /Off Activatesanddeactivatesthescreenilluminationlight.
Distance unit Setsthedistancemeasurementunit.
Angle unit Setstheanglemeasurementunit.
Z-Coordinate Referto"6.3Z‐Coordinate".
2 Dist. Offset Referto"6.42Dist.Offset".
Control Distance Referto"6.5ControlDistance".
Settings Referto"4.1GeneralSettings".
EDM Continuous Referto"6.6EDMContinuous".
Menu ReturnstotheMAIN MENU.